High alumina cement Malaysia- the best refractory lining material that is no match for extreme heat.

Generally, high alumina cement is the top refractory material due to its great performance under varying temperatures.

Once properly applied onto furnace lining or boilers, high alumina refractory cement performs better in temperatures even above 1000°C!

So, get to know the wonders of high alumina castable from its raw material to its application.

What is High Alumina Cement for Refractory?

Basically, high alumina refractory concrete contains roughly about 40% alumina, 40% lime, and up to 8% silica. Whereas the remaining percentage consists of ferrous and ferric oxides.

Table of high alumina castable composition

*percentage may vary based on project

Read more: Calcium aluminate cement

How is refractory HAC made?

Usually, it is made by crushing bauxite and lime into lumps no larger than 100mm.

Then, the crushed product is brought into a furnace to dry off moisture and eliminate carbon dioxide.

After that, the molten material transfers to steel pans which solidifies the material.

Finally, the solid product is fragmented in a rotary cooler before a tube mill grinds it.

Suggested read: Refractory 101: How to Choose the Best Insulation Bricks

Better Refractory with High Alumina Cement in Malaysia

Even though there are many good properties of high alumina castable, only a professional can correctly apply it for refractory linings.

Because if you invest in the best refractory products, you will protect your entire facility and manpower.

Thus, consult a refractory castable supplier in Malaysia to ensure the best refractory outcome for your business.

Suggested read: An Introduction to Sing Lian Ping (SLP) Engineering

The post High Alumina Cement for Refractory in Malaysia appeared first on Refractory Engineering | Abrasion Resistant | Corrosion Protection.

Basically, the high alumina castable refractory consists of monolithic refractory materials. Basically, they are made of high alumina aggregate and powder, mixed with a binder and water reducer.

Moreover, the Aluminum Oxide or Al₂O₃ content in this refractory material is over 48%.

Refractory 101

Application of High Alumina Castable

Generally, it is a popularly used material in refractory for its mechanical strength, resistance to heat, shock, and abrasion.

Because of its superior performance, high alumina refractory materials are commonly used in many industries such as steel, petroleum, chemical, and power generation.

Additionally, it is the ideal refractory material for lining furnaces and kilns including boilers, ceramic kiln, blast furnaces, and chimneys.

Suggested read: 5 Types of Refractory & Its Application in Malaysia

What is High Alumina Castable Material?

Basically, high alumina refractory products are a type of refractory castable composition. It has other compositions such as alumina powder, bauxite powder, high alumina castable cement, and silica fume.

Subsequently, they are mixed following the set proportions which suit the construction or repair work application.

Moreover, what makes it very high quality is the less amount of cement. Therefore, it can withstand extreme temperatures which benefits many industrial plants.

Because it is produced into powder and aggregate, it is the ideal refractory product to use the high alumina castable material for harsh conditions.

High Alumina Refractory Castable Cement Benefits

Other than the benefits stated above, this refractory lining material has many other advantages which makes it ideal for most applications.

Parameters of High Alumina Castable

Note: Castable refractory composition parameters are subject to project requirements

High Alumina Materials Supplier

Because its contents are altered based on the project requirement, you need an expert in refractory solutions.

However, a better choice would be a refractory company that not only provides refractory materials but also complete refractory services.

List of refractory materials

Find the Right Refractory Company

The right refractory company for the right installation

In general, high alumina castable refractory has been simply put, it requires the right expertise to correctly handle and install refractory castable material.

Therefore, you must first find a reliable refractory contractor that can help you make the right decisions for high alumina refractories.

Hence, that’s why SLP has a team of refractory experts that can provide you with complete refractory services unique to your project conditions.

Suggested read: 6 Tips to Choose the Best Refractory Contractor

The post High Alumina Castable Refractory in Malaysia appeared first on Refractory Engineering | Abrasion Resistant | Corrosion Protection.